Page 1 of 1

UAGateway to Siemens SPPA-T3000

Posted: 26 Feb 2020, 09:15
by Ton
I am using a UAGateway (provided by Siemens) connecting it to a Siemens SPPA-T3000 server. The client is PGIM scanner, which only accepts OPC-DA.
I would also like to connect a Siemens S7-1500 (OPC-UA server) to this PGIM scanner, using the same UAGateway. Is this possible or do I need an additional license?

Re: UAGateway to Siemens SPPA-T3000

Posted: 28 Apr 2020, 16:40
by Support Team
Hi,

no that is not possible, the UaGateway licensed to the T3000 will only connect to T3000.
For connecting any other server you will need different license. New license can be purchased at sales@unified-automation.com.

Please note: you can NOT install 2 UaGateway on the same computer, (one with T3000 license and second with other license will NOT work). If this must run on the same computer, please uninstall the T3000-Gateway and re-install UaGateway for our website, use your "new" license and connect T3000 AND S7-1500 AND others simultaniously.