tagfileconfigobject missing nodemanagertagfile.h

Questions regarding the use of the C++ SDK for Server or Client development or integration into customer products ...

Moderator: uasdkcpp

Post Reply
sriramboppana
Jr. Member
Jr. Member
Posts: 1
Joined: 26 Mar 2021, 19:16

tagfileconfigobject missing nodemanagertagfile.h

Post by sriramboppana »

I recently built the OPC UA C++ SDK (1.7.4) for QNX 7.1 64-bit.

Within the SDK, in src/uaserver/coremodule/tagfileconfigobject.cpp, there is a required header dependency "nodemanagertagfile.h".

As far as I can tell, this library is no longer supported in SDK vs. 1.7.4 and the earliest reference I could find for this library is in SDK vs. 1.4 which could mean the tagfileconfigobject.cpp is out of date or no longer supported. I tried excluding the include library command but it led to more than >200 build errors and could not find an alternative library with same API calls that could replace the nodemanagertagfile library. The only method that works so far is to exclude the tagfileconfigobject.cpp from the build.

Are there any insights into this?

User avatar
Support Team
Hero Member
Hero Member
Posts: 2679
Joined: 18 Mar 2011, 15:09

Re: tagfileconfigobject missing nodemanagertagfile.h

Post by Support Team »

Hello,

the files tagfileconfigobject.cpp and tagfileeventtypedata.cpp should not be included in your build.
We need to remove them from the delivery, they are not needed for the SDK.

If the project file is created with CMake, these files are not included.

See src\uaserver\uaservercpp\coremodule\CMakeLists.txt
BUILD_UATAGFILE should be off and the files are only included if this switch is ON.
Best regards
Unified Automation Support Team

Post Reply