Hi Dear,
I just use C++ SDK 1.7.0.
And I create the UA client by this, and I fond that there is something wrong with UaSession::browseNext.
My code just like below;
===========================================================================
UaStatus status;
UaByteString continuationPoint;
UaReferenceDescriptions referenceDescriptions;
ServiceSettings serviceSettings;
UaClientSdk::BrowseContext browseContext;
browseContext.browseDirection = OpcUa_BrowseDirection_Forward;
browseContext.includeSubtype = true;
browseContext.referenceTypeId = OpcUaId_HierarchicalReferences;
status = m_pSession->browse(
serviceSettings,
startingNode,
browseContext,
continuationPoint,
referenceDescriptions);
while (continuationPoint.length() > 0 && status.isGood())
{
UaReferenceDescriptions resultsContinuation;
status = m_pSession->browseNext(
serviceSettings,
OpcUa_False,
continuationPoint,
resultsContinuation);
}
===================================================================
For the method "browseNext",
some times, the status will be "Bad_ContinuationPointInvalid" at first time call, then I can only get 50 nodes by browse;
some times, the status will be "Bad_ContinuationPointInvalid" at second time call, then I can 100 nodes (browseNext can get another 50 nodes);
some times, the status will be "Bad_ContinuationPointInvalid" at third time call, then I can 150 nodes (browseNext can get another 100 nodes);
.........
and I add the trace file.
only see that
11:47:29.066|4|2D38* DONE OpcUa_ClientApi_BrowseNext [ret=0x0,status=0x0]
11:47:29.066|6|2D38* <-- UaSession::browseNext [status=0x804a0000]
11:47:34.640|4|35C0* CALL OpcUa_ClientApi_Read [Session=1] - watchdog read
So what should I do for this?
Thanks for your help.
There is something wrong with UaSession::browseNext
Moderator: uasdkcpp
-
- Full Member
- Posts: 8
- Joined: 21 Nov 2018, 11:05
-
- Jr. Member
- Posts: 1
- Joined: 18 Nov 2019, 12:40
Re: There is something wrong with UaSession::browseNext
Hello,
Try with the same
Try with the same
Code: Select all
UaReferenceDescriptions referenceDescriptions
Code: Select all
status = m_pSession->browseNext(
serviceSettings,
OpcUa_False,
continuationPoint,
referenceDescriptions);