OPC UA C++ Demo Server V1.7.1: sampling rate 10 ms

Questions regarding the use of the C++ SDK for Server or Client development or integration into customer products ...

Moderator: uasdkcpp

Post Reply
RavilN
Full Member
Full Member
Posts: 8
Joined: 19 Jun 2013, 19:46

OPC UA C++ Demo Server V1.7.1: sampling rate 10 ms

Post by RavilN »

Hi,
I have installed C++ demo server, and cannot make it to publish data on demo nodes with rates faster then 100 ms.
I have modified ServerConfig.xml file, section AvailableSamplingRates, and added sampling rate 10 ms. The server returns revised sampling rate as 10 ms, but data changes still reported with 100 ms rate.
I tried to set different publishing rates, faster than sampling rate and slower with queue size enough to hold all values.
I tried to call method Demo/SetSimulationSpeed with 10 ms, tried to enable simulation, nothing helps.
I am subscribed to node ns=2;s=Demo.Dynamic.Scalar.Int16
Tried node ns=2;s=Demo.History.ByteWithHistory too, the same result.

Also, when I add <SamplingRate>1</SamplingRate> into section AvailableSamplingRates, even when there are no clients connected, server uses high CPU (around 60%).

Would be nice if you coudl advise how to configure the server to get data changes as well historical data with rate 10 ms or faster.

Thank you, Ravil

Post Reply