Hi,
I Am working on a project where the OPC UA Server (Phoenix contact AXC 1050 PLC) is connected to a Sierra RV50 router with a M2M Sim-Card (Router 1).
The OPC UA Client is a laptop with TIA Portal WinCC professional on a office-network (Router 2).
So I know that I Should put the IP "opc.tcp://name:Port" of the PLC in the "OPC UA Discovery URL" But this won't work because the PLC is on another network.
Is it possible, and if so, how could I acces the PLC (Router 2) from my Tia portal SCADA Application in the office (Router 1)?
Hope to receive a reaction.
Thanks a lot in advance!
Joost
OPC UA over 2 networks
Moderator: Support Team
- Support Team
- Hero Member
- Posts: 3069
- Joined: 18 Mar 2011, 15:09
Re: OPC UA over 2 networks
Hello,
when connectiong two networks we typically use "routers" in between that can route/translate from the one network into the other.
Please get yourself farmiliar with basic network infrastructure configuration, before starting with OPC UA.
when connectiong two networks we typically use "routers" in between that can route/translate from the one network into the other.
Please get yourself farmiliar with basic network infrastructure configuration, before starting with OPC UA.
Best regards
Unified Automation Support Team
Unified Automation Support Team